Modelica.Mechanics.MultiBody

Library to model 3-dimensional mechanical systems

Information

Library MultiBody is a free Modelica package providing 3-dimensional mechanical components to model in a convenient way mechanical systems, such as robots, mechanisms, vehicles. Typical animations generated with this library are shown in the next figure:

For an introduction, have especially a look at:

• MultiBody.UsersGuide discusses the most important aspects how to use this library.
• MultiBody.Examples contains examples that demonstrate the usage of this library.

Copyright © 1998-2016, Modelica Association and DLR.

This Modelica package is free software and the use is completely at your own risk; it can be redistributed and/or modified under the terms of the Modelica License 2. For license conditions (including the disclaimer of warranty) see Modelica.UsersGuide.ModelicaLicense2 or visit https://www.modelica.org/licenses/ModelicaLicense2.

Extends from Modelica.Icons.Package (Icon for standard packages).

Package Content

Name	Description
UsersGuide	User's Guide of MultiBody Library
World	World coordinate system + gravity field + default animation definition
Examples	Examples that demonstrate the usage of the MultiBody library
Forces	Components that exert forces and/or torques between frames
Frames	Functions to transform rotational frame quantities
Interfaces	Connectors and partial models for 3-dim. mechanical components
Joints	Components that constrain the motion between two frames
Parts	Rigid components such as bodies with mass and inertia and massless rods
Sensors	Sensors to measure variables
Visualizers	3-dimensional visual objects used for animation
Types	Constants and types with choices, especially to build menus
Icons	Icons for MultiBody package

Modelica.Mechanics.MultiBody.World

World coordinate system + gravity field + default animation definition

Information

Model World represents a global coordinate system fixed in ground. This model serves several purposes:

• It is used as inertial system in which the equations of all elements of the MultiBody library are defined.
• It is the world frame of an animation window in which all elements of the MultiBody library are visualized.
• It is used to define the gravity field in which a multi-body model is present. Default is a uniform gravity field where the gravity acceleration vector g is the same at every position. Additionally, a point gravity field or no gravity can be selected. Also, function gravityAcceleration can be redeclared to a user-defined function that computes the gravity acceleration, see example Examples.Elementary.UserDefinedGravityField.
• It is used to define default settings of animation properties (e.g., the diameter of a sphere representing by default the center of mass of a body, or the diameters of the cylinders representing a revolute joint).
• It is used to define a visual representation of the world model (= 3 coordinate axes with labels) and of the defined gravity field.
  

Since the gravity field function is required from all bodies with mass and the default settings of animation properties are required from nearly every component, exactly one instance of model World needs to be present in every model on the top level. The basic declaration needs to be:

    inner Modelica.Mechanics.MultiBody.World world

Note, it must be an inner declaration with instance name world in order that this world object can be accessed from all objects in the model. When dragging the "World" object from the package browser into the diagram layer, this declaration is automatically generated (this is defined via annotations in model World).

All vectors and tensors of a mechanical system are resolved in a frame that is local to the corresponding component. Usually, if all relative joint coordinates vanish, the local frames of all components are parallel to each other, as well as to the world frame (this holds as long as a Parts.FixedRotation, component is not used). In this "reference configuration" it is therefore alternatively possible to resolve all vectors in the world frame, since all frames are parallel to each other. This is often very convenient. In order to give some visual support in such a situation, in the icon of a World instance two axes of the world frame are shown and the labels of these axes can be set via parameters.

Parameters

Connectors