Annex60.BoundaryConditions.WeatherData.BaseClasses

IEA EBC Annex 60

Annex60.BoundaryConditions.WeatherData.BaseClasses

Package with base classes for Annex60.BoundaryConditions.WeatherData

Information

This package contains base classes that are used to construct the models in Annex60.BoundaryConditions.WeatherData.

Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).

Package Content

Name	Description
CheckBlackBodySkyTemperature	Check the validity of the black-body sky temperature data
CheckCeilingHeight	Ensures that the ceiling height is above a lower bound
CheckIRRadiation	Ensure that the radiation is not smaller than 0
CheckPressure	Ensures that the interpolated pressure is between prescribed bounds
CheckRadiation	Ensure that the radiation is not smaller than 0
CheckRelativeHumidity	Check the validity of relative humidity
CheckSkyCover	Constrains the sky cover to [0, 1]
CheckTemperature	Check the validity of temperature data
CheckWindDirection	Constrains the wind direction to [0, 2*pi] degree
CheckWindSpeed	Ensures that the wind speed is non-negative
ConvertRadiation	Convert the unit of solar radiation received from the TMY3 data file
ConvertRelativeHumidity	Convert the relative humidity from percentage to real
ConvertTime	Converts the simulation time to calendar time in scale of 1 year (365 days)
EquationOfTime	Equation of time
LocalCivilTime	Converts the clock time to local civil time.
SolarTime	Solar time
getAbsolutePath	Gets the absolute path of a URI
getHeaderElementTMY3	Gets an element from the header of a TMY3 weather data file
getLatitudeTMY3	Gets the latitude from a TMY3 weather data file
getLongitudeTMY3	Gets the longitude from a TMY3 weather data file
getTimeZoneTMY3	Gets the time zone from a TMY3 weather data file
Examples	Collection of models that illustrate model use and test models

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckBlackBodySkyTemperature

Check the validity of the black-body sky temperature data

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckBlackBodySkyTemperature

Information

This component checks the value of the black-body sky temperature. If the temperature is outside TMin and TMax, the simulation will stop with an error.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Type	Name	Default	Description
Temperature	TMin	203.15	Minimum allowed temperature [K]
Temperature	TMax	343.15	Maximum allowed temperature [K]

Connectors

Type	Name	Description
input RealInput	TIn	Black-body sky temperature [K]
output RealOutput	TOut	Black-body sky temperature [K]

Modelica definition

block CheckBlackBodySkyTemperature "Check the validity of the black-body sky temperature data" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput TIn( final quantity="ThermodynamicTemperature", final unit="K", displayUnit="degC") "Black-body sky temperature"; Modelica.Blocks.Interfaces.RealOutput TOut( final quantity="ThermodynamicTemperature", final unit="K", displayUnit="degC") "Black-body sky temperature"; parameter Modelica.SIunits.Temperature TMin(displayUnit="degC") = 203.15 "Minimum allowed temperature"; parameter Modelica.SIunits.Temperature TMax(displayUnit="degC") = 343.15 "Maximum allowed temperature"; equation TOut = TIn; assert(TOut > TMin, "Temperature out of bounds.\n" + " TOut = " + String( TOut)); assert(TOut < TMax, "Temperature out of bounds.\n" + " TOut = " + String( TOut)); end CheckBlackBodySkyTemperature;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckCeilingHeight

Ensures that the ceiling height is above a lower bound

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckCeilingHeight

Information

This component ensures that the ceiling height is at least 0 meters.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	ceiHeiIn	Input ceiling height [m]
output RealOutput	ceiHeiOut	Ceiling height [m]

Modelica definition

block CheckCeilingHeight "Ensures that the ceiling height is above a lower bound" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput ceiHeiIn( final quantity="Height", final unit="m") "Input ceiling height"; Modelica.Blocks.Interfaces.RealOutput ceiHeiOut( final quantity="Height", final unit="m") "Ceiling height"; constant Modelica.SIunits.Height ceiHeiMin=0 "Minimum allowed ceiling height"; equation ceiHeiOut = Annex60.Utilities.Math.Functions.smoothMax( ceiHeiIn, ceiHeiMin, 0.1); end CheckCeilingHeight;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckIRRadiation

Ensure that the radiation is not smaller than 0

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckIRRadiation

Information

This block ensures that the radiation is not smaller than 0. The Modelica data reader will interpolate data when it reads the data from a file. Thus, it is possible to generate negative values due to the interpolation.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	HIn	Input horizontal infrared irradiation [W/m2]
output RealOutput	HOut	Horizontal infrared irradiation [W/m2]

Modelica definition

block CheckIRRadiation "Ensure that the radiation is not smaller than 0" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput HIn( final quantity="RadiantEnergyFluenceRate", final unit="W/m2") "Input horizontal infrared irradiation"; Modelica.Blocks.Interfaces.RealOutput HOut( final quantity="RadiantEnergyFluenceRate", final unit="W/m2") "Horizontal infrared irradiation"; constant Modelica.SIunits.RadiantEnergyFluenceRate HMin=0.0001 "Minimum value for radiation"; equation HOut = Annex60.Utilities.Math.Functions.smoothMax( x1=HIn, x2=HMin, deltaX=HMin/10); end CheckIRRadiation;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckPressure

Ensures that the interpolated pressure is between prescribed bounds

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckPressure

Information

This component ensures that the interpolated pressure is between 31,000 Pa and 120,000 Pa.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	PIn	Input pressure [Pa]
output RealOutput	POut	Atmospheric pressure [Pa]

Modelica definition

block CheckPressure "Ensures that the interpolated pressure is between prescribed bounds" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput PIn( final quantity="Pressure", final unit="Pa") "Input pressure"; Modelica.Blocks.Interfaces.RealOutput POut( final quantity="Pressure", final unit="Pa") "Atmospheric pressure"; constant Modelica.SIunits.Pressure PMin=3100 "Minimum allowed pressure"; constant Modelica.SIunits.Pressure PMax=120000 "Maximum allowed pressure"; equation assert(PIn > PMin, "Pressure out of bounds.\n" + " PIn = " + String(PIn)); assert(PIn < PMax, "Pressure out of bounds.\n" + " PIn = " + String(PIn)); POut = PIn; end CheckPressure;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckRadiation

Ensure that the radiation is not smaller than 0

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckRadiation

Information

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	HIn	Input radiation [W/m2]
output RealOutput	HOut	Radiation [W/m2]

Modelica definition

block CheckRadiation "Ensure that the radiation is not smaller than 0" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput HIn( final quantity="RadiantEnergyFluenceRate", final unit="W/m2") "Input radiation"; Modelica.Blocks.Interfaces.RealOutput HOut( final quantity="RadiantEnergyFluenceRate", final unit="W/m2") "Radiation"; constant Modelica.SIunits.RadiantEnergyFluenceRate HMin=0.0001 "Minimum value for radiation"; equation HOut = Annex60.Utilities.Math.Functions.smoothMax( x1=HIn, x2=HMin, deltaX=HMin/10); end CheckRadiation;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckRelativeHumidity

Check the validity of relative humidity

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckRelativeHumidity

Information

This component constrains the value of relative humidity to a range of [0, 1].

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	relHumIn	Input relative humidity [1]
output RealOutput	relHumOut	Relative humidity [1]

Modelica definition

block CheckRelativeHumidity "Check the validity of relative humidity" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput relHumIn(final unit="1") "Input relative humidity"; Modelica.Blocks.Interfaces.RealOutput relHumOut(final unit="1") "Relative humidity"; constant Real delta=0.01 "Smoothing parameter"; protected constant Real relHumMin=delta "Lower bound"; constant Real relHumMax=1 - delta "Upper bound"; equation relHumOut = Annex60.Utilities.Math.Functions.smoothLimit( relHumIn, relHumMin, relHumMax, delta/10); end CheckRelativeHumidity;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckSkyCover

Constrains the sky cover to [0, 1]

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckSkyCover

Information

This component constrains the interpolated sky cover between 0 and 1.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	nIn	Input sky cover [0, 10]
output RealOutput	nOut	Sky cover [0, 1] [1]

Modelica definition

block CheckSkyCover "Constrains the sky cover to [0, 1]" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput nIn(min=0, max=1) "Input sky cover [0, 10]"; Modelica.Blocks.Interfaces.RealOutput nOut(min=0, max=1, unit="1") "Sky cover [0, 1]"; constant Real delta=0.01 "Smoothing parameter"; protected constant Real nMin=delta "Lower bound"; constant Real nMax=10 - delta "Upper bound"; equation nOut = Annex60.Utilities.Math.Functions.smoothLimit( nIn, nMin, nMax, delta/10); end CheckSkyCover;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckTemperature

Check the validity of temperature data

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckTemperature

Information

This component checks the value of temperature. If the temperature is outside TMin and TMax, the simulation will stop with an error.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Type	Name	Default	Description
Temperature	TMin	203.15	Minimum allowed temperature [K]
Temperature	TMax	343.15	Maximum allowed temperature [K]

Connectors

Type	Name	Description
input RealInput	TIn	Input Temperature [K]
output RealOutput	TOut	Output temperature [K]

Modelica definition

block CheckTemperature "Check the validity of temperature data" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput TIn( final quantity="ThermodynamicTemperature", final unit="K", displayUnit="degC") "Input Temperature"; Modelica.Blocks.Interfaces.RealOutput TOut( final quantity="ThermodynamicTemperature", final unit="K", displayUnit="degC") "Output temperature"; parameter Modelica.SIunits.Temperature TMin(displayUnit="degC") = 203.15 "Minimum allowed temperature"; parameter Modelica.SIunits.Temperature TMax(displayUnit="degC") = 343.15 "Maximum allowed temperature"; equation TOut = TIn; assert(TOut > TMin, "Temperature out of bounds.\n" + " TOut = " + String( TOut)); assert(TOut < TMax, "Temperature out of bounds.\n" + " TOut = " + String( TOut)); end CheckTemperature;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckWindDirection

Constrains the wind direction to [0, 2*pi] degree

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckWindDirection

Information

This component constrains the interpolated wind direction between 0 and 360 degree.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	nIn	Input wind direction [rad]
output RealOutput	nOut	Wind direction [rad]

Modelica definition

block CheckWindDirection "Constrains the wind direction to [0, 2*pi] degree" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput nIn( final quantity="Angle", final unit="rad", displayUnit="deg") "Input wind direction"; Modelica.Blocks.Interfaces.RealOutput nOut( final quantity="Angle", final unit="rad", displayUnit="deg") "Wind direction"; constant Real delta=0.01 "Smoothing parameter"; protected constant Real nMin=0 "Lower bound"; constant Real nMax=2*Modelica.Constants.pi "Upper bound"; equation nOut = Annex60.Utilities.Math.Functions.smoothLimit( nIn, nMin, nMax, delta/10); end CheckWindDirection;

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckWindSpeed

Ensures that the wind speed is non-negative

Annex60.BoundaryConditions.WeatherData.BaseClasses.CheckWindSpeed

Information

This component ensures that the wind speed is non-negative.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	winSpeIn	Input wind speed [m/s]
output RealOutput	winSpeOut	Wind speed [m/s]

Modelica definition

block CheckWindSpeed "Ensures that the wind speed is non-negative" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput winSpeIn(final quantity="Velocity", final unit="m/s") "Input wind speed"; Modelica.Blocks.Interfaces.RealOutput winSpeOut(final quantity="Velocity", final unit="m/s") "Wind speed"; constant Modelica.SIunits.Velocity winSpeMin=1e-6 "Minimum allowed wind speed"; equation // Modelica Table will interpolate data when it reads the weather data file. // It can generate negative values due to the interpolation. winSpeOut = Annex60.Utilities.Math.Functions.smoothMax( x1=winSpeIn, x2=winSpeMin, deltaX=winSpeMin/10); end CheckWindSpeed;

Annex60.BoundaryConditions.WeatherData.BaseClasses.ConvertRadiation

Convert the unit of solar radiation received from the TMY3 data file

Annex60.BoundaryConditions.WeatherData.BaseClasses.ConvertRadiation

Information

The TMY3 data for solar radiation is the radiation accumulated in one hour. Thus, it used a unit of Wh/m2. This component converts Wh/m2 to W/m2 that is the standard unit in Modelica.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	HIn	Input radiation [W.h/m2]
output RealOutput	HOut	Radiation [W/m2]

Modelica definition

block ConvertRadiation "Convert the unit of solar radiation received from the TMY3 data file" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput HIn(final unit="W.h/m2") "Input radiation"; Modelica.Blocks.Interfaces.RealOutput HOut( final quantity="RadiantEnergyFluenceRate", final unit="W/m2") "Radiation"; protected constant Modelica.SIunits.Time Hou=3600 "1 hour"; equation HOut = HIn/Modelica.SIunits.Conversions.to_hour(Hou); end ConvertRadiation;

Annex60.BoundaryConditions.WeatherData.BaseClasses.ConvertRelativeHumidity

Convert the relative humidity from percentage to real

Annex60.BoundaryConditions.WeatherData.BaseClasses.ConvertRelativeHumidity

Information

This component converts the relative humidity from percentage to real. Input is the relative humidity in percentage, as this is the data format that is used in the Typical Meteorological Year weather data.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	relHumIn	Value of relative humidity in percentage [1]
output RealOutput	relHumOut	Relative humidity between 0 and 1 [1]

Modelica definition

block ConvertRelativeHumidity "Convert the relative humidity from percentage to real" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput relHumIn(unit="1") "Value of relative humidity in percentage"; Modelica.Blocks.Interfaces.RealOutput relHumOut(unit="1") "Relative humidity between 0 and 1"; equation relHumOut = relHumIn/100; end ConvertRelativeHumidity;

Annex60.BoundaryConditions.WeatherData.BaseClasses.ConvertTime

Converts the simulation time to calendar time in scale of 1 year (365 days)

Annex60.BoundaryConditions.WeatherData.BaseClasses.ConvertTime

Information

This component converts the simulation time to calendar time in a scale of 1 year (365 days).

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	modTim	Simulation time [s]
output RealOutput	calTim	Calendar time [s]

Modelica definition

block ConvertTime "Converts the simulation time to calendar time in scale of 1 year (365 days)" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput modTim( final quantity="Time", final unit="s") "Simulation time"; Modelica.Blocks.Interfaces.RealOutput calTim( final quantity="Time", final unit="s") "Calendar time"; protected constant Modelica.SIunits.Time year=31536000 "Number of seconds in a year"; discrete Modelica.SIunits.Time tStart "Start time of period"; initial equation tStart = integer(modTim/year)*year; equation when modTim - pre(tStart) > year then tStart = integer(modTim/year)*year; end when; calTim = modTim - tStart; end ConvertTime;

Annex60.BoundaryConditions.WeatherData.BaseClasses.EquationOfTime

Equation of time

Annex60.BoundaryConditions.WeatherData.BaseClasses.EquationOfTime

Information

This component computes the difference between solar noon and noon of local civic time.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	nDay	Zero-based day number in seconds (January 1=0, January 2=86400) [s]
output RealOutput	eqnTim	Equation of time [s]

Modelica definition

block EquationOfTime "Equation of time" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput nDay( quantity="Time", unit="s") "Zero-based day number in seconds (January 1=0, January 2=86400)"; Modelica.Blocks.Interfaces.RealOutput eqnTim( final quantity="Time", final unit="s", displayUnit="min") "Equation of time"; protected Real Bt "Intermediate variable"; equation Bt = Modelica.Constants.pi*((nDay + 86400)/86400 - 81)/182 "Our unit is s instead of day in (A.4.2b)"; eqnTim = 60*(9.87*Modelica.Math.sin(2*Bt) - 7.53*Modelica.Math.cos(Bt) - 1.5* Modelica.Math.sin(Bt)) "Our unit is s instead of min in (A.4.2a)"; end EquationOfTime;

Annex60.BoundaryConditions.WeatherData.BaseClasses.LocalCivilTime

Converts the clock time to local civil time.

Annex60.BoundaryConditions.WeatherData.BaseClasses.LocalCivilTime

Information

This component converts the clock time to local civil time. The parameter timZon represents the time zone of the facility (relative to Greenwich Mean Time or the 0th meridian). Time zones west of GMT (e.g. North America) are represented as negative; east of GMT as positive. Fraction of hours are represented in decimals (e.g. for 6:30, use 6.5).

The formula is based on Michael Wetter's thesis (A4.1):

  locTim = greTim + (lon*180/pi)*86400/360 = cloTim - timZon + lon*43200/pi

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Type	Name	Default	Description
Time	timZon		Time zone [s]
Angle	lon		Longitude [rad]

Connectors

Type	Name	Description
input RealInput	cloTim	Clock time [s]
output RealOutput	locTim	Local civil time [s]

Modelica definition

block LocalCivilTime "Converts the clock time to local civil time." extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput cloTim( final quantity="Time", final unit="s") "Clock time"; parameter Modelica.SIunits.Time timZon(displayUnit="h") "Time zone"; parameter Modelica.SIunits.Angle lon(displayUnit="deg") "Longitude"; Modelica.Blocks.Interfaces.RealOutput locTim( final quantity="Time", final unit="s") "Local civil time"; protected final parameter Modelica.SIunits.Time diff = - timZon + lon*43200/Modelica.Constants.pi "Difference between local and clock time"; equation locTim = cloTim + diff; end LocalCivilTime;

Annex60.BoundaryConditions.WeatherData.BaseClasses.SolarTime

Solar time

Annex60.BoundaryConditions.WeatherData.BaseClasses.SolarTime

Information

This component computes the local solar time.

Note: To avoid events, this block does not convert solar time to a scale of 24 hours.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Type	Name	Description
input RealInput	locTim	Local time [s]
input RealInput	equTim	Equation of time [s]
output RealOutput	solTim	Solar time [s]

Modelica definition

block SolarTime "Solar time" extends Modelica.Blocks.Icons.Block; Modelica.Blocks.Interfaces.RealInput locTim(quantity="Time", unit="s") "Local time"; Modelica.Blocks.Interfaces.RealInput equTim(quantity="Time", unit="s") "Equation of time"; Modelica.Blocks.Interfaces.RealOutput solTim( final quantity="Time", final unit="s", displayUnit="s") "Solar time"; equation solTim = locTim + equTim "Our unit is s in stead of h in (A.4.3)"; end SolarTime;

Annex60.BoundaryConditions.WeatherData.BaseClasses.getAbsolutePath

Gets the absolute path of a URI

Information

The function returns the absolute path of a uniform resource identifier (URI) or local file name. If the file is not found, then this function terminates with an assert.

This function has been introduced to allow users to specify the name of weather data files with a path that is relative to the library path. This allows users to change the current working directory while still being able to read the files.

Inputs

Type	Name	Default	Description
String	uri		A URI

Outputs

Type	Name	Description
String	path	The absolute path of the file pointed to by the URI

Modelica definition

function getAbsolutePath "Gets the absolute path of a URI" input String uri "A URI"; output String path "The absolute path of the file pointed to by the URI"; algorithm path := Modelica.Utilities.Files.loadResource(uri); assert(Modelica.Utilities.Files.exist(path), "File '" + uri + "' does not exist."); end getAbsolutePath;

Annex60.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3

Gets an element from the header of a TMY3 weather data file

Information

This function scans the weather data file for a line that starts with the string

start

where start is a parameter. When this line is found, the function returns the element at the position number position, where position is a parameter. A comma is used as the delimiter of the elements.

Inputs

Type	Name	Description
String	filNam	Name of weather data file
String	start	Start of the string that contains the elements
String	name	Name of data element, used in error reporting
Integer	position	Position of the element on the line that contains 'start'

Outputs

Type	Name	Description
String	element	Element at position 'pos' of the line that starts with 'start'

Modelica definition

function getHeaderElementTMY3 "Gets an element from the header of a TMY3 weather data file" input String filNam "Name of weather data file"; input String start "Start of the string that contains the elements"; input String name "Name of data element, used in error reporting"; input Integer position(min=1) "Position of the element on the line that contains 'start'"; output String element "Element at position 'pos' of the line that starts with 'start'"; protected String lin "Line that is used in parser"; Integer iLin "Line number"; Integer index = 0 "Index of string #LOCATION"; Integer staInd "Start index used when parsing a real number"; Integer nexInd "Next index used when parsing a real number"; Boolean found "Flag, true if #LOCATION has been found"; Boolean EOF "Flag, true if EOF has been reached"; String fouDel "Found delimiter"; algorithm // Get line that starts with 'start' iLin :=0; EOF :=false; while (not EOF) and (index == 0) loop iLin:=iLin + 1; (lin, EOF) :=Modelica.Utilities.Streams.readLine(fileName=filNam, lineNumber=iLin); index :=Modelica.Utilities.Strings.find( string=lin, searchString=start, startIndex=1, caseSensitive=false); end while; assert(not EOF, "Error: Did not find '" + start + "' when scanning the weather file." + "\n Check for correct weather file syntax."); // Loop over the tokens until the position is reached nexInd :=1; for i in 1:position-1 loop nexInd :=Modelica.Utilities.Strings.find( string=lin, searchString = ",", startIndex=nexInd+1); assert(nexInd > 0, "Error when scanning weather file. Not enough tokens to find " + name + "." + "\n Check for correct file syntax." + "\n The scanned line is '" + lin + "'."); end for; staInd := nexInd; // Find the next delimiter nexInd :=Modelica.Utilities.Strings.find( string=lin, searchString = ",", startIndex=nexInd+1); assert(nexInd > 0, "Error when scanning weather file. Not enough tokens to find " + name + "." + "\n Check for correct file syntax." + "\n The scanned line is '" + lin + "'."); // Get the element element :=Modelica.Utilities.Strings.substring(lin, startIndex=staInd+1, endIndex=nexInd-1); end getHeaderElementTMY3;

Annex60.BoundaryConditions.WeatherData.BaseClasses.getLatitudeTMY3

Gets the latitude from a TMY3 weather data file

Information

This function returns the latitude of the TMY3 weather data file.

Inputs

Type	Name	Default	Description
String	filNam		Name of weather data file

Outputs

Type	Name	Description
Angle	lat	Latitude from the weather file [rad]

Modelica definition

function getLatitudeTMY3 "Gets the latitude from a TMY3 weather data file" input String filNam "Name of weather data file"; output Modelica.SIunits.Angle lat "Latitude from the weather file"; protected Integer nexInd "Next index, used for error handling"; String element "String representation of the returned element"; algorithm element := Annex60.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3( filNam=filNam, start="#LOCATION", name = "longitude", position=7); (nexInd, lat) :=Modelica.Utilities.Strings.Advanced.scanReal( string=element, startIndex=1, unsigned=false); assert(nexInd > 1, "Error when converting the latitude '" + element + "' from a String to a Real."); // Convert from degree to rad lat :=lat*Modelica.Constants.pi/180; // Check if latitude is valid assert(abs(lat) <= Modelica.Constants.pi+Modelica.Constants.eps, "Wrong value for latitude. Received lat = " + String(lat) + " (= " + String(lat*180/Modelica.Constants.pi) + " degrees)."); end getLatitudeTMY3;

Annex60.BoundaryConditions.WeatherData.BaseClasses.getLongitudeTMY3

Gets the longitude from a TMY3 weather data file

Information

This function returns the longitude of the TMY3 weather data file.

Inputs

Type	Name	Default	Description
String	filNam		Name of weather data file

Outputs

Type	Name	Description
Angle	lon	Longitude from the weather file [rad]

Modelica definition

function getLongitudeTMY3 "Gets the longitude from a TMY3 weather data file" input String filNam "Name of weather data file"; output Modelica.SIunits.Angle lon "Longitude from the weather file"; protected Integer nexInd "Next index, used for error handling"; String element "String representation of the returned element"; algorithm element := Annex60.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3( filNam=filNam, start="#LOCATION", name = "longitude", position=8); (nexInd, lon) :=Modelica.Utilities.Strings.Advanced.scanReal( string=element, startIndex=1, unsigned=false); assert(nexInd > 1, "Error when converting the longitude '" + element + "' from a String to a Real."); // Convert from degree to rad lon :=lon*Modelica.Constants.pi/180; // Check if longitude is valid assert(abs(lon) < 2*Modelica.Constants.pi, "Wrong value for longitude. Received lon = " + String(lon) + " (= " + String(lon*180/Modelica.Constants.pi) + " degrees)."); end getLongitudeTMY3;

Annex60.BoundaryConditions.WeatherData.BaseClasses.getTimeZoneTMY3

Gets the time zone from a TMY3 weather data file

Information

This function returns the time zone of the TMY3 weather data file.

Inputs

Type	Name	Default	Description
String	filNam		Name of weather data file

Outputs

Type	Name	Description
Time	timZon	Time zone from the weather file [s]

Modelica definition

function getTimeZoneTMY3 "Gets the time zone from a TMY3 weather data file" input String filNam "Name of weather data file"; output Modelica.SIunits.Time timZon "Time zone from the weather file"; protected Integer nexInd "Next index, used for error handling"; String element "String representation of the returned element"; algorithm element := Annex60.BoundaryConditions.WeatherData.BaseClasses.getHeaderElementTMY3( filNam=filNam, start="#LOCATION", name = "longitude", position=9); (nexInd, timZon) :=Modelica.Utilities.Strings.Advanced.scanReal( string=element, startIndex=1, unsigned=false); assert(nexInd > 1, "Error when converting the time zone '" + element + "' from a String to a Real."); timZon :=timZon*3600; // Check if time zone is valid assert(abs(timZon) < 24*3600, "Wrong value for time zone. Received timZon = " + String(timZon) + " (= " + String(timZon/3600) + " hours)."); end getTimeZoneTMY3;

http://iea-annex60.org